The HP4-917 Control Box is compact with switches on the front for On/Off Power,
Forward or Reverse Rotation, and Manual or Foot Speed Control. Speed can be
adjusted from low to full speed using the dial on the box or with the foot
pedal. An Overload Protector Light is also featured that turns red and sounds a
beeping alarm when the motor stalls.
For high speed applications up to 38,000 rpm including light deburring of cast
pieces, bright cutting in jewelry
The back of the control box has a convenient voltage selector switch for
operating with either 115 volt or 230 volt. The control converts AC current to
DC cuurrent required for the handpiece.
making and fine detailing in wood.
Kit includes control box, handpiece with 1/8" collet,
variable speed foot control, handpiece cradle, spare pair
of motor brushes, spare fuse and collet changing wrenches.
Compared to flex shafts, micro motors have much less torque, however, the higher
speed results in a comparable
rate of material removal with a lighter touch. The simple cord connection
between the handpiece motor and control
box is another key advantage. Unlike the "drag" and general restriction in
maneuverability you have with a shaft and
sheath, micro motors offer much greater freedom of movement.
The MH-170 High Speed Rotary Handpiece
has a slender, contoured grip for precise and very high speed work and quick
release rotary type chuck. It has a fan cooled, brush-type continuous duty motor
that runs cool and vibration free with permanently lubricated, shielded ball
bearings that require no lubrication.
The NEW 1070 Kit includes:
* HP4-917 Control Box
* MH-170 Handpiece with 1/8" Collet (Reducer to 3/32" sold above)
* HP4-960 Variable Speed Foot Control
* HP4-933 Handpiece Cradle
* Spare pair of motor brushes, spare fuse, collet changing wrenches.
Handpiece specifications: 6.2" overall length, 5/8" grip diameter, 1" motor
diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.
More Foredom Products